[ HOME ] [ UP ] [ FEEDBACK ] [ CONTENT ] [ SEARCH ]
Wedge Transducers

[ Ball Transducers ] [ Wedge Transducers ] [ 138 kHz Transducers ] [ 200 kHz Transducer ]
SITE LINKS

 

UTHE

UTHE Home
UTHE WEDGE TRANSDUCERS

UTHE Transducers (click on picture to enlarge)

A = Overall Length
 B = Horn Length
 C = Collar Length
 D = Collar Diameter
 E = Tool Hole
 (click on picture to enlarge)
 
bullet Typical Impedance - Less than 25 ohms
bullet Power Handling - Up to 3 Watts
bullet Mass, Center of Gravity, Mass Moment of Inertia
bullet Model 10G-MA, For Matsushita bonders
bullet Model 10-SMH, For use with Shin Me Hua bonders

Generator Support
Compatible with the following Uthe generators:

bullet Model USG-PCI
bullet Model VME-PCI
bullet Model USG-ISA
bullet Model 10H-P2136
bullet Model 10K-136
We provide the above information upon request

Customized design and dimensions available

STANDARD WEDGE TRANSDUCERS  

Model

Freq.

A

 B C D E Tool Drop Wire Angle

Comments/ Compatibility
3PTD 94.0 2.78 1.389 0.342 0.600 0.0626 1.000 FOT* 45/60 Devoltech, Dias
18PT 63.5 4.32 2.315 0.590 0.500 0.0626 0.750 0.555 32/45/60 Shinkawa, Hybond, Hesse
20PT 64.9 4.28 2.280 0.600 0.750 0.0626 0.437 0.250 30/60
21PT 55.5 5.20

2.740

 0.800 0.750 0.1251 0.750 K&S N/A
22PT 62.1 6.09 4.076 0.600 0.750 0.0626 0.437 0.295 30/45 IBM, K&S4123
23PT 64.2 6.02

4.000

 0.600 0.750 0.0626 0.437 0.250 30/45 Westbond, K&S
24PT 63.5 4.32 2.315 0.600 0.750 0.0626 0.750 0.555 30/45
25PT 63.7 7.31

5.360

 0.900 0.750 0.0626 0.828 0.450 30/45 Mei/Mechel
27PT 64.0 4.32 2.315 0.900 0.750 0.1251 0.750 0.265 OPTION Devol., K&S4127, Shinkawa
28PT 61.5 4.49

2.375

 0.600 0.750 0.0938 1.000 0.600 OPTION
29PT 61.5 4.32 2.425 0.600 0.750 0.1251 1.000 0.750 OPTION
30PT 61.5 4.32

2.315

 0.600 0.750 0.1251 1.000 0.750 80
52PT 63.2 5.95 3.900 0.600 0.750 0.0939 0.437 0.250 30/45
53PT 63.4 5.97

3.810

 0.900 0.750 0.1251 0.625 0.400 30/45
54PT 63.9 5.97 3.810 0.900 0.750 0.1251 1.000 0.767 30/45
254PTB 63.9 5.97

3.810

 0.900 0.750 0.1251 1.000 0.767 30/45 Devoltech
254PTC 63.9 5.97 3.810 0.900 0.750 0.1251 1.000 0.767 30/45 For >15 mil wire
62PT 63.7 6.00

3.840

 0.600 0.750 0.0626 0.437 0.243 30/45 Shin-Me-Hua, Anza
63PT 64.7 5.91 3.840 0.600 0.750 0.0626 0.828 0.460 30/45
70PT 63.9 4.32

2.315

 0.900 0.747 0.0626 0.750 0.555 32/60 K&S1470, ASM

A = Overall Length, B = Horn Length, C = Collar Length, D = Collar Diameter,  E = Tool Hole

* FOT = Tool Flushed with Top of Transducer

HEATED WEDGE TRANSDUCERS  

Model

Freq.

A

 B C D E Tool Drop Wire Angle

Comments/ Compatibility
20HW 64.0 4.25 2.280 0.600 0.750 0.0626 0.437 0.250 30/60
23HW 61.7 6.03 3.935 0.600 0.750 0.0626 0.437 0.240 30/45/60
25HW 65.0 7.26 5.16 0.800 0.750 0.0626 0.828 0.450 30/45
31HW 61.5 6.03

3.935

 0.600 0.750 0.0626 0.750 0.555 45/60
W2H290 61.5 4.32 2.315 0.600 0.750 0.1251 1.000 0.750 OPTION

A = Overall Length, B = Horn Length, C = Collar Length, D = Collar Diameter,  E = Tool Hole

HIGH FREQUENCY WEDGE TRANSDUCERS  

Model

Freq.

A

 B C D E Tool Drop Wire Angle

Comments/ Compatibility
W5S18B 138.0 4.3 2.315 0.590 0.500 0.0626 0.750 FOT* 32/45/60 Shinkawa, Hybond, Hesse
W5S180 136.0 4.35 2.315 0.590 0.500 0.0626 0.750 FOT* 32/45/60 Shinkawa, Hybond, Hesse
W4S180 107.0 4.33 2.315 0.590 0.500 0.0626 0.750 FOT* 32/45/60 Shinkawa, Hybond, Hesse
W3S031 98.5 2.78

1.389

 0.342 0.600 0.0626 1.000 FOT* 45/60 Devoltech, Dias
W4S110 136.0 4.98 2.378 0.515 0.500 0.0626 0.828 .0555 32/45/60 Shinkawa US

A = Overall Length, B = Horn Length, C = Collar Length, D = Collar Diameter,  E = Tool Hole

* FOT = Tool Flushed with Top of Transducer
[ HOME ] [ UP ]
Send mail to info@bita.lu with questions or comments about this web site.
Copyright © 1998 BITA ELECTRONIQUE S.A.
Last modified: 2019-08-05