[ HOME ] [ UP ] [ FEEDBACK ] [ CONTENT ] [ SEARCH ]
Ball Transducers

[ Ball Transducers ] [ Wedge Transducers ] [ 138 kHz Transducers ] [ 200 kHz Transducer ]
SITE LINKS

 

UTHE

UTHE Home
UTHE BALL TRANSDUCERS

UTHE Transducers (click on picture to enlarge)

A = Overall Length
 B = Horn Length
 C = Collar Length
 D = Collar Diameter
 E = Tool Hole
 (click on picture to enlarge)
 

Although high frequency bonding has been gaining a lot of attention lately, Uthe has been supplying high frequency transducers for over 10 years. Lower temperature bonding, shortened bond times, and uniform intermetallics are only some of the benefits obtained with Uthe's high frequency systems. Uthe has over 20 high frequency models with a number of 60 kHz counterparts.

With over 75 standard and 15 customized models, Uthe has a transducer for virtually any wire bonder in the field. Uthe's research and development team are continuously supplying transducers to accommodate new bonders and ultrasonic processes.

STANDARD BALL TRANSDUCERS  

Model

Freq.

A

 B C D E

Comments/ Compatibility
17ST 63.5 4.32 2.425 0.600 0.500 0.0626 ASM, Devoltech, Hitachi, Hybond
18ST 64.3 5.94

3.935

 0.900 0.748 0.0626 Shinkawa
19ST 63.1 6.05 4.073 0.600 0.749 0.0626 K&S 1418, 1419, Series
20/24ST 64.2 4.38

2.425

 0.600 0.750 0.0626 Ti Abacus. Shin-Me-Hua
22ST 63.1 6.08 4.073 0.600 0.750 0.0626
23ST 63.5 5.94

3.990

 0.600 0.750 0.0626 Mitsubishi, Matsushita, Toshiba
25ST 64.1 7.54 5.460 0.900 0.750 0.0626 MEI
26ST 63.9 4.38

2.280

 0.600 0.750 0.0626 Philips, Phicom
B2S174 63.5 4.32 2.425 0.600 0.500 0.0626 Closed End 17ST

A = Overall Length, B = Horn Length, C = Collar Length, D = Collar Diameter,  E = Tool Hole

LIGHTWEIGHT BALL TRANSDUCERS  

Model

Freq.

A

 B C D E

Comments/ Compatibility
17STL 63.1 4.32 2.425 0.600 0.500 0.0626
23STL 62.5 5.94

3.990

 0.600 0.750 0.0626
26STL 64.0 4.38 2.280 0.600 0.750 0.0626
82STL 60.2 4.46

2.359

 FLANGE FLANGE 0.0626 KS1482, 1484

A = Overall Length, B = Horn Length, C = Collar Length, D = Collar Diameter,  E = Tool Hole

HIGH FREQUENCY BALL TRANSDUCERS  

Model

Freq.

A

 B C D E

Comments/ Compatibility
3ST 100.5 2.78 1.440 0.442 0.600 0.0626
4ST 99.5 3.86 2.375 0.550 0.500 0.0626 ESEC
B6S309 167.0 4.30 2.420 0.660 0.500 0.0626 ASM, Devoltech, ESEC, Hitachi
B4S048 101.5 3.86 2.375 0.550 0.500 0.0626 ASM, Devoltech, Hitachi
B5S041 120.0 4.00 2.080 0.600 0.500 0.0626
B4S261 107.0 4.38 2.280 0.600 0.750 0.0626 Phicom
B4S010 120.0 4.20 2.460 0.600 0.750 0.0626
B4S100 112.0 3.28 2.365 0.750 0.500 0.063 UTC100, ASM
B5S191 108.5 6.05 4.073 0.600 0.749 0.0626 K&S 1419
B5S17B 138.0 4.32 2.425 0.600 0.500 0.0626 ASM, ESEC, Devoltech
B4S280 108.0 5.08 2.425 0.600 0.750 0.0626 Kaijo
B5S230 111.0 5.90 3.990 0.600 0.750 0.0626 Mitsubishi, Matsushita, Toshiba

A = Overall Length, B = Horn Length, C = Collar Length, D = Collar Diameter,  E = Tool Hole

LIGHTWEIGHT HIGH FREQUENCY BALL TRANSDUCERS  

Model

Freq.

A

 B C D E

Comments/ Compatibility
B4A172 108.0 4.32 2.425 0.600 0.500 0.0626 ASM, Devoltech, ESEC, Hitachi
B4A230 107.0 5.90

3.990

 0.600 0.750 0.0626 Mitsubishi, Matsushita, Toshiba
B5L191 107.0 6.05 4.073 0.600 0.749 0.0626 K&S 1419
B6T100 165.0 3.28

2.365

 0.750 0.500 0.0626 Devoltech, Shinkawa

A = Overall Length, B = Horn Length, C = Collar Length, D = Collar Diameter,  E = Tool Hole

HEATED TRANSDUCERS  

Model

Freq.

A

 B C D E

Comments/ Compatibility
18HC 64.7 6.08 in 3.935 0.900 0.748 0.0626 0.437 FLUSH OPTION
19HC 61.2 6.30 4.073 0.600 0.750 0.0626 0.437 FLUSH OPTION
23HC 62.1 6.04 3.999 0.600 0.750 0.0626 0.437 FLUSH OPTION
25HC 63.3 7.44 5.260 0.800 0.750 0.0626 0.437 FLUSH OPTION
26HC 62.5 4.40 2.280 0.600 0.750 0.0626 0.437 FLUSH OPTION
20/24HC 62.5 4.38 2.425 0.600 0.750 0.0626 0.437 FLUSH OPTION
B2H200 62.5 4.38 2.425 0.600 0.750 0.0626 0.437 FLUSH OPTION

A = Overall Length, B = Horn Length, C = Collar Length, D = Collar Diameter,  E = Tool Hole
[ HOME ] [ UP ]
Send mail to info@bita.lu with questions or comments about this web site.
Copyright © 1998 BITA ELECTRONIQUE S.A.
Last modified: 2019-08-05