[ HOME ] [ UP ] [ FEEDBACK ] [ CONTENT ]
RTC D-SERIES

[ Semiconductor ] [ Flat Panel Displays ] [ Microelectronics ] [ Solar Cell ] [ RTC S-SERIES ] [ RTC D-SERIES ] [ RTC EFC-SERIES ] [ RTC SMD-SERIES ] [ RTC AG-SERIES ] [ RTC H-SERIES ] [ RTC HT-SERIES ] [ RTC LA-SERIES ] [ RTC WB-SERIES ] [ RTC T-SERIES ] [ RTC TFA-SERIES ] [ RTC C-SERIES ] [ RTC PV-SERIES ] [ RTC PVD SERIES ]
SITE LINKS

 

RADIANT TECHNOLOGY CORP.

RTC Home
RTC D-SERIES INFRARED FURNACES 

The D-Series of infrared convection ovens are designed for processes requiring close control of both temperature and atmosphere.  Primarily intended for thick film drying, adhesive and epoxy curing, these ovens can also perform many other lower temperature processes requiring air and nitrogen operating atmospheres. The maximum operating temperature of the system is 500°C..
The chamber construction, gas controls, and exhaust are designed to control in-process atmosphere by maintaining equilibrium between input exhaust and leakage. Typical performance allows oven-induced gaseous contaminants to be held at or below 50 ppm using either air or nitrogen operating atmospheres.
The ovens in the D-series are similar to each other except for the heated length and belt width, which determine the processing capacity.
OPTIONS 

RTC D-Series Oven
RTC Model D-915
(click on picture to enlarge)
bullet

Oxygen Analyzer
bullet

Moisture Analyzer
bullet

Hydrogen Operation, Hydrogen/Nitrogen Mixing
bullet

Hydrogen Detector
bullet

On-Screen Profiling
bullet

Ultrasonic Cleaner with Optional Dryer
bullet

Belt Brush Cleaner.
bullet

Air Purification System.
bullet

Air Filter Regulator.
bullet

Emergency Power Supply.
bullet

Uninterruptible Power Supply.
bullet

Element Monitor.
bullet

Conveyor Extensions.
bullet

Redundant Over Temperature Scanner/Shutdown.
bullet

Electrical Line Filter.
bullet

Low Range Belt Speed (0.5 to 10 in./min.).
bullet

RTC Software Program, PC/HOST Communications and Protocol.
bullet

Three Tier Process Ready/Alarm Light Tower
PRODUCT DATA SHEETS 
RTC D-Series Overview 
SPECIFICATIONS 
MODEL NUMBER  D-610 D-615 D-624  D-915  D-924  D-936 
Conveyor Width

9.5 in. (24cm)

15 in. (38cm)

24 in.  (61cm)

15 in. (38cm)

24 in.  (61cm)

36 in. (91cm)
Heating Length (inches)

60 in. (152.4cm)

60 in. (152.4cm)

60 in. (152.4cm)

90 in. (228.6cm)

90 in. (228.6cm)

90 in. (228.6cm)
Belt Width

9.5 in. (24cm)

15 in. (38cm)

24 in.  (61cm)

15 in. (24cm)

24 in.  (61cm)

36 in. (91cm)
Overall Length

123 in. (3.10m)

123 in. (3.10m)

123 in. (3.10m)

153 in. (3.86m)

153 in. (3.86m)

153 in. (3.86m)
Overall Width

43 in. (109.2cm)

43 in. (109.2cm)

51 in. (129.5cm)

43 in. (109.2cm)

51 in. (129.5cm)

62 in. (157.4cm)
Overall Height

67.8 ±1.5 in. (172.2 ±3.8cm)

67.8 ±1.5 in. (172.2 ±3.8cm)

67.8 ±1.5 in. (172.2 ±3.8cm)

67.8 ±1.5 in. (172.2 ±3.8cm)

67.8 ±1.5 in. (172.2 ±3.8cm)

67.8 ±1.5 in. (172.2 ±3.8cm)
Conveyor Height

36 ±1.5 in. (91.4 ±3.8 cm)

36 ±1.5 in. (91.4 ±3.8 cm)

36 ±1.5 in. (91.4 ±3.8 cm)

36 ±1.5 in. (91.4 ±3.8 cm)

36 ±1.5 in. (91.4 ±3.8 cm)

36 ±1.5 in. (91.4 ±3.8 cm)
Heated Zones

2

2

2

3

3

3
Max Operating Temperature

500°C

500°C

500°C

500°C

500°C

500°C
Peak Power

7.2 KW

11.4 KW

19.5 KW

17 KW

29.3 KW

37 KW
Normal Power

4.3 KW

6.8 KW

11 KW

10.2 KW

12.8 KW

19.8 KW
Voltage

208-240 Volt, 3 phase

208-240 Volt, 3 phase

308-480 Volt, 3 phase

308-480 Volt, 3 phase

308-480 Volt, 3 phase

308-480 Volt, 3 phase
Weight Net

1500 lbs

1500 lbs

1700 lbs

1800 lbs

2200 lbs

2600 lbs
Weight Crated

2200 lbs

2200 lbs

2600 lbs

2700 lbs

3200 lbs

3900 lbs
Specification can be changed without notice.
[ HOME ] [ UP ]
Send mail to tish.ward@bita.se with questions or comments about this web site.
Copyright © 1998 BITA ELECTRONIQUE S.A.
Last modified: 2010-08-11