[ HOME ] [ UP ] [ FEEDBACK ] [ CONTENT ]
Core Angle

[ Cap. Design ] [ Tip Diameter ] [ Face Angle ] [ OR Dimensions ] [ Tip Finish ] [ Hole Diam. ] [ Core Angle ] [ ICA 1 ] [ ICA 2 ] [ CD ] [ Fine Pitch 1 ] [ Fine Pitch 2 ] [ Problem ] [ Order 1 ] [ Order 2 ] [ Tip Mod. ] [ Side Reliefs ] [ Important 1 ] [ Important 2 ]
SITE LINKS

 

GAISER TOOL COMPANY

Gaiser Tool Company - Home Page

PREVIOUS PAGE

NEXT PAGE

GAISER CAPILLARY INFORMATION

8. CORE ANGLE

GTC Figure 19

Figure 19. Gaiser capillaries are manufactured with core angles of 10 degrees. The 10 degree core angle promotes good looping, good transference of ultrasonic energy and allows for higher bottleneck of other tip-modification designs. 

 

GTC Figure 20

Figure 20. The 20 degree core angle limits the obtainable bottleneck height and reduces the effective transfer of ultrasonic energy. This is due to the reduced wall thickness as shown above. This limitation is crucial for the fine-pitch tool designs requiring an angle bottleneck.

 

Get the BASIC CAPILLARY BONDING and DESIGN document in BASIC CAPILLARY BONDING/ DESIGN format

PREVIOUS PAGE

NEXT PAGE

[ HOME ] [ UP ]
Send mail to tish.ward@bita.se with questions or comments about this web site.
Copyright © 1998 BITA ELECTRONIQUE S.A. 
Last modified: 2011-11-12