[ HOME ] [ UP ] [ FEEDBACK ] [ CONTENT ]
1548

[ INFO ] [ 1513 ] [ 1572 ] [ 1570 ] [ 1574 ] [ 1548 ] [ 1573 ] [ 1551 ] [ 1520 ] [ 1590 ] [ 1591 ] [ 1592 ] [ 1593 ] [ 1800-60 ] [ 1800-70 ] [ 1800-80-25 ] [ 1800-80-33 ] [ 1732-3 ] [ Optional ]
SITE LINKS

 

GAISER TOOL COMPANY

Gaiser Tool Company - Home Page

GAISER 1548 & 1548N SERIES

THERMOSONIC CAPILLARIES  

1/16 in. (1.58 mm) SHANK DIAMETER CERAMIC CAPILLARIES

The 1548 capillary is designed for applications with good bondability. The 1548 is equivalent to the K&S 41480 series. Typically specified with a polished finish, the 1548 will provide long tool life on surfaces with good metallization. The 1548 series features a

flat face, large outside radius, 90 double inside chamfer design. The "GM" Gaiser matte finish may be specified for enhanced 2nd bond performance on surfaces with difficult bondabiliy.  

GTC 1548 and 1548N Series

NOTE:

For tungsten carbide material, specify 1148 & 1148N series (1/16in. dia. only)
For 1/8in. (3.17 mm) diameter ceramic, specify 1248 & 1248N series.

DASH NUMBER
(p/n)

H
±.0001/
±2,5 in./µ

IR
in./µ
(ref.)

B
±.0002/
±5 in./µ

OR
±.0003/
±8 in./µ

T30o
±.0003/
±8 in./µ

T20o
±.0003/
±8 in./µ

SUGGESTED
WIRE
DIAMETER
1548-10

.0010 / 25

.00040 / 10

.0018 / 46

.0018 / 46

.0050 / 127

.0052 / 132

.0005/13 to
.0008/20
1548-12

.0012 / 30

.00035 / 9

.0019 / 48

.0018 / 46

.0050 / 127

.0052 / 132

.0007/18 to
.0009/23
1548-13

.0013 / 33

.00040 / 10

.0021 / 53

.0021 / 53

.0060 / 152

.0063 / 160

.0008/20 to
.0010/25
1548-15

.0015 / 38

.00050 / 13

.0025 / 64

.0025 / 64

.0070 / 178

.0073 / 185

.0009/23 to
.0011/28
1548-17

.0017 / 43

.00060 / 15

.0029 / 74

.0029 / 74

.0080 / 203

.0084 / 213

0010/25 to
.0013/33

1548-18

.0018 / 46

.00065 / 17

.0031 / 79

.0029 / 74

.0080 / 203

.0084 / 213

1548-20

.0020 / 51

.00070 / 18

.0034 / 86

.0032 / 81

.0090 / 229

.0094 / 239

0013/33 to
.0015/38

1548-22

.0022 / 56

.00070 / 18

.0036 / 91

.0032 / 81

.0090 / 229

.0094 / 239

1548-30

.0030 / 76

.00090 / 23

.0048 / 123

.0048 / 122

.0140 / 356

.0147 / 373

0020/51

1548-35

.0035 / 89

.00090 / 23

.0053 / 135

.0065 / 165

.0165 / 419

.0174 / 442

.0020/51 to
.0025/64
1548-40

.0040 / 102

.00125 / 32

.0065 / 165

.0065 / 165

.0185 / 470

.0194 / 493

0030/76

Dimensions in inches unless otherwise specified

1548 & 1548N SERIES

bullet HOLE LESS THAN 0.0011 AND 0.0025 THROUGH 0.0049, TOLERANCE IS +.0002; -.0001
bullet HOLE GREATER THAN 0.0049, TOLERANCE IS +.0003; -.0001
bullet B DIM GREATER THAN 0.0040, TOLERANCE IS .0003; -.0002
bullet OR tolerance ±.0003 for OR ±.0030; for OR >.0030 tolerance is +10%
bullet Tighter tolerances available at additional charges


More information how to order

Get the STANDARD CAPILLARY Product Datasheet in STANDARD CAPILLARY format, (find Model 1548/1548N on page 5). 

[ HOME ] [ UP ]
Send mail to tish.ward@bita.se with questions or comments about this web site.
Copyright © 1998 BITA ELECTRONIQUE S.A. 
Last modified: 2011-11-12