 |
 |
 |
|
|
|
|
The new AUREL C1010R
Full Automatic Printing Line for sensors with rotary table,
is made for precision printing combined with a high throughput.
Cycle times are drastically reduced.
Valuable production time is used for the process, while loading,
inspection (vision or manual) printing and unloading is done in
parallel. The machine needs less floor space than a comparable linear
solution. So it can fit, where manual machines have been used before. |
|
|
|
|
|
 |
Modular design for manual or
automatic substrate handling.
|
|
|
Precision rotating table with 4 steps
and accuracy of ± 0.015 mm. |
|
|
Based on standard AUREL C1010 wich is
fieldproven in many installations. |
|
|
All axis motor
driven, controlled and programmable.
|
|
|
PC controls
with menu guidance with parameter controls and printout of
production data. |
|
|
Table loading
into loose nests, precision centering is done only in the
printing position. |
|
|
VISION
centering optional. |
|
|
|
|
|
|
|
Squeegee pressure and parallelism
controls and two independent height adjustment for print and
flood with 0.01 increments. |
|
|
DC motor drives for smooth movement ot
the printing head |
|
|
Z axis motorized and programmable
for controlled snap-off. |
|
|
Automatic squeegee and screen
holder lift for easy machine set up and cleaning. |
|
|
Programmable motorized unloading
arm with gripper head for collocating the substrates over the
dryer conveyor. |
|
|
Vacuum pump for substrate hold
down included in the machine.
|
|
|
|
